Click-Fit Tank Adapter and Filter 1/2 Inch:

The 1/2” Click Fit Adapter and Filter is simply pushed onto the tap provided with every model of FlexiTank or FlexiTank Pro. The filter resides within the length of the fitting. It reduces impurities in the water before it enters the pipework connected to the AQUAvalves trays and pots. This helps prevent the build up of sediment and the clogging of pipework. The outlet on the 1/2” Click Fit Adapter and Filter allows the user to run 1/2” pipe from the end of the fitting.

Pro Tip: When elevating your FlexiTank on a stand, install your inline filter away from the FlexiTank tap to prevent tension against the FlexiTank.

3/8 Grommet:

Choose 3/8″ for the AQUAvalve5 (gray/black) that works with Grommeted trays, the 12.4 gal Hard Tank, Tray2Grow System and 3/8″ fittings.

3/8 In-Line Tap:

3/8″ in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 12.4 gal plastic reservoirs. This allows you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

Golf Filter Material:

Replacement filter material for the 1/4″ or 3/8″ Golf Filter. The material is universal and fits Golf Filters with either size of fitting.

Golf Filter Case:

A replacement Golf Filter Case Only. The Golf Filter is for use with 12.4 gal hard tanks. This is either the 3/8″ size that is compatible with the 3/8″ OD tubing and AQUAvalve5 or the 1/4″ size compatible with the older, pre-2020 AQUAvalve4 and AQUAvalve3. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.

1/2 Inch In-Line Tap:

1/2″ in-line taps are a very useful accessory. They can be added to the end of a layout when you are using hosepipe (1/2″ pipe). You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

FLEXITANK TAP:

The FlexiTank Tap allows you to connect your FlexiTank to your chosen water distribution system via a tapped supply. During initial assembly the large threaded end is pushed through the main port in the lower FlexiTank body. The the washer and nut included with the Tap fitting are then placed over and tightened on the threaded end.

The Click-Fit Tap outlet that remains on the outside of the FlexiTank allows you to attach a standard 1/2” Green Hose Connector, a 1/2” Click Fit Tank Adaptor and Filter  or a 1/2”-1/4” Click Fit Tank Adaptor and Filter.

Aquavalve Silicone:

A replacement silicone for the AQUAvalve5.

AQUAvalve5 Silicones are Float-specific. Top and Bottom Float Silicones differ.

Choose AQUAvalve5 Bottom Float Silicones for AQUAvalve5 Bottom Float (larger silicone piece)

Choose AQUAvalve5 Top Float Silicones for AQUAvalve5 Top Float (smaller silicone piece)