This fitting will allow you to connect your 1/2in irrigation tubing to your hose spigot.

These Perma-Loc fittings are used to convert polyethylene tubing to a male hose thread connection. The Male Hose Threads ( MHT ) on these fittings are compatible with standard USA garden hose threads.

Perma-Loc fittings and adapters are heavy-duty reusable connectors for all your connection needs. Perma-Loc fittings require no special tools to connect to tubing or tape. Perma-Loc fittings can be used on blank tubing or drip line.

• To Use: Simply twist the locking collar back towards the center of the fitting, exposing the barb. Then push tubing or tape over the barbed end. Next, hand-tighten the locking collar over the tubing or tape for a permanent, secure fit.
• To Remove: Just loosen the locking collar, pull tube off, and re-use as needed.

Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut that comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting.