Staal Plast Active Aqua 2.0 Infinity Bench Trays

Staal Plast Polystyrene Glue 300 ml is made specifically for Active Aqua 2.0 INFINITY Trays and IGE grow trays assembly or repair. Sold by case of 8 only.

It consists of High Impact Polystyrene (HIPS) material from which the trays are also being produced – this ensures a perfect material integration and connection in the assembly and repair process. 

• Each 300 ml glue is good for approximately 19-feet of tray connections
• Use breathing protection, googles, and gloves for installation
• Glue must dry at 68F for 48-72 hours, lower temps will increase drying time
• Do not use the glued trays until all connections are completely hardened
• Do not over apply
• Glue is permanent once hardened

Active Aqua introduces the new and improved 2.0 Infinity Trays by Staal Plast — an array of premium UV-stable High Impact Polystyrene (HIPS) expandable trays that work with standard 4' wide and 5’ wide benches. Designed for commercial installations. After many years of continuous use, the trays are still 100% recyclable.

The 2.0 Infinity Trays consists of End Trays, Middle Trays, and Division Trays which interlock to form 1 continuous grow tray maximizing your square footage.

Each 2.0 Infinity Tray setup MUST include the following, in consecutive order: (1) End Tray w/Drain, (up to 7) Middle Trays, (1) Division Tray, and (1) End Tray.

1. (1) End Tray w/Drain -6.5’ length
2. (1-7) Middle Tray - 6.5' length
3. (1) Division Tray - 4' or 2' length
4. (1) End Tray - 6.5' length

Staal Plast Polystyrene glue (STP3010 sold separately) is used to seal the trays together at each joint.

*Download the 2.0 Infinity Tray Installation Guide for more details.

Tray Info:

• Proudly made in the USA
• Low profile at 2.5-inch height
• Polystyrene glue seals trays together permanently at each joint, (STP3010 sold separately)
• No arch lip allows you to maximize your inner tray space
• Maximum tray length of 65'
• Division Trays can be cut to size (top of block only) to customize tray length
• Recyclable—made from UV-stable High Impact Polystyrene
• Shallow grooves for easy cleaning

Recommended Use:

• Active Aqua IZON Rolling Bench Systems
• Active Aqua 4x8 Rolling Bench (AARBK48)
• IGE Benches
• Standard 4’ & 5’ wide benches